Welcome to Anditech Multiservices Pty Ltd

0
  • No products in the cart.
Avongard AW11 - Crack Width Gauge (metric)
Avongard Crack Width Gauge 1
Avongard Crack Width Gauge 7

AW11 – Avongard Crack Width Gauge

25.00AU$ exc. GST

Manufactured by Avongard in the UK, the Crack Width Gauge is widely used to measure cracks from 0.1mm to 7.0mm, or as a ruler from 0 to 160mm.

 

Downloads:

 

86 in stock (can be backordered)

Description

Crack Width Gauge

The Crack Width Gauge is manufactured from high impact polycarbonate. One side of the gauge has a 160mm graduated scale in millimetres and centimetres. The other side has a series of crack width comparison guides ranging from 0.1mm to 7.0mm.

  • Suitable for internal and external use
  • Scale calibrated from end of Crack Width Gauge allows measuring of cracks in corners.
  • Supplied in a protective case.
  • Manufactured to conform to BS EN ISO 9001:2000
  • The co-efficient of linear thermal expansion is 7.0×10-5 cm/cm/oC for ambient temperatures between -30 Degrees C to +30 Degrees C

 

 

Using the Crack Width Gauge

Selecting a location where the edges of the crack are reasonably straight and parallel, hold the Crack Width Gauge in contact with the crack (at right angles to the crack).

Align the Crack Width Gauge where the calibration and the crack are the same width. Record the width, length and location of the crack.

 

Larger and Corner Cracks

The scale at the bottom of the gauge may be used to measure crack widths greater than 7mm and cracks in corners or awkward locations.

Additional information

Weight 0.2 kg
Dimensions 22 × 16 × 2 cm
Supplier

Avongard

Product SKU

AW11

You may also like…